Wheatheart WHR 80/100 x 31-71ft Augers PTO-SD - Manual (Page 10)

2. S AFETY WHEATHEART - GHR & WHR GRAIN AUGERS
2.4. O PERATION S AFETY PTO-SD D RIVE M ODEL
10 30641 R1
• Inspect lift cable before using auger. Replace if frayed or damaged. Make
sure it is seated properly in cable sheaves and cable clamps are secure.
• Operate auger on level ground free of debris. If ground is uneven, anchor the
auger to prevent tipping or upending.
• Augers are not insulated. Keep away from electrical lines. Electrocution can
occur without direct contact.
• Support the discharge end and/or anchor the intake end before operating to
prevent upending.
• Do not use auger as a hoist.
• Empty auger before raising or lowering.
• Lower auger at completion of operation or when not in use. Auger could drop
rapidly in case of cable break or hydraulic failure (where applicable).
• Keep the work area clean and tidy.
• Lock winch before operating auger.