Wheatheart WHR 80/100 x 31-71ft Augers PTO-SD - Manual (Page 43)

WHEATHEART - GHR & WHR GRAIN AUGERS 4. T RANSPORT & P LACEMENT
PTO-SD D RIVE M ODEL 4.2. P LACEMENT P ROCEDURE
30641 R1 43
6. Once auger is in position, chock wheels on both sides and apply the park
brake on the tractor (or chock its wheels as well) to prevent movement during
operation.
Important: When releasing auger from the towing vehicle, test the intake end for downward
weight. Do not raise the intake end above drawbar height. When the intake end
is elevated too high with auger in raised position, the balance of weight quickly
transfers to the discharge end, causing it to upend. Ensure proper anchoring/
support.
7. When operating auger in the raised position, rest the discharge end lightly on
the bin roof, or tie to bin to prevent wind from toppling auger. When operating
the auger in a freestanding position, anchor the intake end.
8. Anchor and/or support auger during operation.
• When lower half of auger empties of grain, the weight balance transfers
to upper end of auger, which can cause upending.
9. See “Operation” on page 45 for correct lowering procedure.
CAUTION
Do not use auger as a hoist to raise any object
regardless of weight. This will create an
unsafe condition and will void warranty.