Great Plains 3S-4000F Predelivery Manual - Manual (Page 11)

9/12/2009 195-242Q
9 Assembly
Installing Walkboards
Bolts for walkboards are shipped in a bag in one of
the drill boxes.
Bolt walkboards (1) to box support channels.
Use the 1/2 x 1-1/4 inch bolts (2), lock washers
nand hex nuts on inside of wings and on center
section.
1
2
18921
Use the 1/2 x 1-3/4 inch bolts (3), lock washers
and hex nuts to bolt the walkboard and step (4) on
outside ends of wings.
NOTE: The steps (4) are not interchangeable.
Bolt steps so that steps jog away from the end
panel and extend back.
18920
3
4