Great Plains 3S-4000F Predelivery Manual - Manual (Page 9)

9/12/2009 195-242Q
7 Assembly
Installing Middle Box on Frame
1. With forklift chains secured around lifting bar
on back of center section box, lift center sec-
tion box up to folded drill.
2. Bolt center section to drill tongue as shown
using 7/8-inch bolts, flat washers, lock wash-
ers and nuts.
3. Connect truss tubes to center section as
shown using clevis pins. Secure clevis pins
with cotter pins provided. Take looseness out
of truss by adjusting turnbuckle, but do not
overtighten.
19115