Great Plains 3PYPA Predelivery Manual - Manual (Page 30)

26 3PYPA Table of Contents Index Great Plains Manufacturing, Inc.
401-647Q Table of Contents Index 2012-08-08
Lower Seed Box Structure
55. Check tire pressure. See “Tire Inflation Chart” on
page 65.
56. Depending on how the structure is being supported,
use the lift-assist cylinders, hoist or lift to lower the
seed box structure onto the tires.
Remove Hopper (Option)
If no seed hopper was included, skip to step 60.
Refer to Figure 42
57. Remove the bolts holding the hopper shipping
bracket . The bracket and bolts are not reused.
Refer to Figure 43
58. Remove the U-bolt and bar
restraining the
hopper on the opposite side. The bar and fasteners
are not reused.
59. Use a fork lift to remove the hopper and set it out of
the way temporarily.
Note: For shipping, the hopper was installed sideways on
the seed support structure. It must be removed and
correctly remounted before use. Remount is done
at step 110.
Figure 42
Hopper Shipping Bracket
25369
1 1
Figure 43
Hopper Shipping U-Bolt
25370
2
2