Great Plains 2S-2600HDF Operator Manual v1 - Manual (Page 20)

16 2S-2600/F/HD/HDF Table of Contents Index Great Plains Manufacturing, Inc.
195-440M Table of Contents Index 2014-05-16
Electrical Connections
Refer to Figure 7
Plug drill electrical lead into tractor seven-pin connector.
If your tractor is not equipped with a seven-pin connector,
contact your dealer for installation.
Refer to Figure 8
If the drill is equipped with the optional shaft monitor,
mate the connector for the cab display.
See “Shaft Monitor” on page 89 for ordering
information.
Refer to Figure 9
If the drill is equipped with the point row option, mate the
connector for the cab control.
See “Point Row Clutch” on page 89 for ordering
information.
Figure 7
Lighting Connector
26467
Figure 8
Shaft Monitor Connector
34221
Figure 9
Point-Row Connector
26469