Great Plains 2S-2600HDF Operator Manual v1 - Manual (Page 93)

Great Plains Manufacturing, Inc. Table of Contents Index Options 89
2014-05-16 Table of Contents Index 195-440M
Shaft Monitor
This kit provides a cab alarm in the event that a main box
seed meter shaft stops turning (which might result from
excess down-pressure lifting a gauge wheel, low tire
pressure/flat tire, chain break or clutch malfunction).
Order one kit per drill.
Point Row Clutch
On the standard 2S-2600/F/HD/HDF drill, both sections
raise and lower simultaneously. Shutting off seed flow on
one or two sections requires stopping and making setup
changes. The Point Row Clutch option provides cab
control of opener lift on a section-by-section basis. Order
one kit per drill.
For operations, see “Point Row Operation” on page 41.
Flat Folding Markers
Hydraulically operated markers provide precise
pass-to-pass spacing by leaving a user-controlled visible
score mark to one side.
The single marker is left-side mounted. Dual markers are
operated through an automatic sequence valve. After
each fold operation, the next unfold extends the other
marker. Order one kit per drill.
Dual Markers add 887 lbs (402 kg) to the drill.
Single Marker adds 456 lbs (207 kg).
For operation, see “Marker Operation” on page 40. See
also “Marker Setup” on page 20, “Marker Adjustments”
on page 60 and “Marker Maintenance” on page 76.
Description Part Number
2-Channel Shaft Monitor 116-282A
Vansco 3-Channel 116-121A
34210
18943
Description Part Number
2S-2600 Point Row Accessory 195-263A
2S-2600HD Point Row Accessory 195-306A
22962
Description Part Number
2S-2600/F/HD/HDF Dual Markers 113-553A
2S-2600/F/HD/HDF Single (LH)
Marker
113-552A
26497