Transport machinery safely, Avoid high pressure fluids, Prepare for emergencies – Great Plains YP1625 Operator Manual User Manual

Page 5

Advertising
background image

7/12/2005

401-182M

3

Important Safety Information

Transport Machinery Safely

Maximum transport speed for implement is 20
mph. Some rough terrains require a slower
speed. Sudden braking can cause a towed load to
swerve and upset.

▲

Do not exceed 20 mph. Never travel at a

speed which does not allow adequate control
of steering and stopping. Reduce speed if
towed load is not equipped with brakes.

▲

Comply with state and local laws.

▲

Do not tow an implement that, when fully

loaded, weighs more than 1.5 times the weight
of towing vehicle.

▲

Carry reflectors or flags to mark planter in

case of breakdown on the road.

▲

Keep clear of overhead power lines and other

obstructions when transporting.

▲

Do not fold or unfold the planter while the trac-

tor is moving.

Avoid High Pressure Fluids

Escaping fluid under pressure can penetrate the
skin, causing serious injury.

▲

Avoid the hazard by relieving pressure before

disconnecting hydraulic lines.

▲

Use a piece of paper or cardboard, NOT

BODY PARTS, to check for suspected leaks.

▲

Wear protective gloves and safety glasses or

goggles when working with hydraulic systems.

▲

If an accident occurs, see a doctor immedi-

ately. Any fluid injected into the skin must be
surgically removed within a few hours or gan-
grene may result.

Prepare for Emergencies

▲

Be prepared if a fire starts.

▲

Keep a first aid kit and fire extinguisher handy.

▲

Keep emergency numbers for doctor, ambu-

lance, hospital and fire department near
phone.

911

Advertising