Great Plains YP1625 Operator Manual - Manual (Page 79)

7/12/2005 401-182M
77 Veris Drive Operating Instructions
Figure 80
Figure 81
Figure 82
Refer to Figure 80
1. Enter number of rows here using Up/Down ar-
row keys. Press Function key to advance to
next window.
Refer to Figure 81
2. Enter your planned planting speed using Up/
Down arrow keys. Calibration mode will not
accept a speed higher than 10 mph. Press
Function key to advance to next window.
Refer to Figure 82
3. Enter the amount of seed you want to mea-
sure. For volumetric metering, this should be
at least 1/4 of a lb. For singulated metering, at
least 100 seeds should be selected. Press
Function key to advance to next window.
22721
22720
22780