Great Plains 2525P Operator Manual - Manual (Page 15)

2013-05-10 118-231M
Great Plains Manufacturing, Inc. 11
Introduction
Great Plains welcomes you to its growing family of new
product owners. Your 3-Point Precision Seeding System
has been designed with care and built by skilled workers
using quality materials. Proper setup, maintenance, and
safe operating practices will help you get years of satis-
factory use from the machine.
Document Family
118-231M Owner’s Manual (this document)
118-231B Seed Rate Charts
118-231P Parts Manual
Description of Unit
The 2020P, 2025P, 2520P and 2525P are 3-point
mounted implements for precision seeding using Great
Plains 20-Series or 25-Series row units.
Intended Usage
Use the drill to seed production-agriculture crops only.
Do not modify the drill for use with attachments other
than Great Plains options and accessories specified for
use with the drill.
Using This Manual
This manual will familiarize you with safety, assembly,
operation, adjustments, troubleshooting, and mainte-
nance. Read this manual and follow the recommenda-
tions to help ensure safe and efficient operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in this manual are
determined by facing the direction the machine will travel
while in use unless otherwise stated.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
22705
Figure 1
Left/Right Notation
18327
L
R