Great Plains 2525P Operator Manual - Manual (Page 62)

58 2020P/2025P and 2520P/2525P Great Plains Manufacturing, Inc.
118-231M 2013-05-10
Drive System Maintenance
Refer to Figure 72
For proper operation and to prevent downtime and
repair, keep drive chains properly adjusted and lubri-
cated. Regularly check drive chains for excess slack and
wear.
Adjust idlers to remove any excess slack from chains.
More than
1 ⁄
2
in (6.4mm) in the longest span of any chain
is “excess”.
Note: Be sure chain is installed with the chain connector
link retainer facing out for ease of access and in-
spection, and the clip opening (split end) facing the
opposite direction of chain travel. See Figure 86,
page 65.
Figure 72
Drive Chains
26223