Great Plains 2525P Operator Manual - Manual (Page 21)

2013-05-10 118-231M
Great Plains Manufacturing, Inc. 17
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity and the following infor-
mation will lead to efficient operation and good working
habits. Always operate farm machinery with safety in
mind.
Pre-Operation Checklist
High Pressure Fluid Hazard:
Escaping fluid under pressure can have sufficient pressure to
penetrate the skin. Check all hydraulic lines and fittings
before applying pressure. Fluid escaping from a very small
hole can be almost invisible. Use paper or cardboard, not
body parts, and wear heavy gloves to check for suspected
leaks. If injured, seek medical assistance from a doctor that is
familiar with this type of injury. Foreign fluids in the tissue
must be surgically removed within a few hours or gangrene
will result.
1. Carefully read “Important Safety Information” on
page 1.
2. Lubricate drill as indicated under “Lubrication” on
page 67.
3. Check all tires for proper inflation. See “Tire Infla-
tion Chart” on page 77.
4. Check all bolts, pins and fasteners. Torque as
shown in “Torque Values Chart” on page 78.
5. Check drill for worn or damaged parts. Repair or
replace parts before going to the field.
6. Check hydraulic hoses, fittings and cylinders for
leaks. Repair or replace before going to the field.
7. On Model 20P, remove parking stands and store
inverted in stand mounts. See page 22 for illustra-
tion.
8. Rotate both gauge wheels to see that the drive and
meters are working properly and free from foreign
material.
Falling Hazard:
Watch your step when walking on drill ladder and walkboard.
Falling from drill could cause severe injury or death.