Great Plains 3S-3000F Operator Manual v2 - Manual (Page 17)

15
Section 1 Drill Preparation and Setup
11/9/07 3S-3000 Three-Section Folding Drill 195-110M-A
Great Plains Mfg., Inc.
Transfer Drive Shaft Vertical Adjustment
Figure 1-7
15621
To align the clutch jaws in the vertical direction, loosen the
two 5/8" bolts (#1) on the break-away adjustment plate at the back side of the toolbar and slide the 1/2" (#2) plate up
or down in the desired direction, as shown in Figure 1-7.