Great Plains 3S-3000F Operator Manual v2 - Manual (Page 62)

60
Section 6 Options
3S-3000 Three-Section Folding Drill 195-110M-A 11/9/07
Great Plains Mfg., Inc.
3S-3000 Feed Cup Plugs
Feed Cup Plugs are available to block off individual rows
when planting with wider row spacing is desired. These
plugs are installed by pushing them into the feed cup open-
ings on the desired rows.
Feed Cup Plugs
817-087C 1 3/4 Wide Feeder Cup Plug
15642
3S-3000 Shaft Monitors
The optional 3 Channel Shaft Monitor is an electronic
monitoring system to detect when the feed cup shafts
stop turning and warn the user of a possible problem sit-
uation. If a feed cup shaft stops for a period of 30 sec-
onds, an alarm will sound and a warning light will come on
designating the failed shaft.
For more information refer to:
•
Shaft Monitor Operation in the “Operating Instruc-
tions” section starting on page 31.
Shaft Monitor Bundle
116-121A Vansco 3-Channel Shaft Monitor
13178