Great Plains 3S-3000HDF Operator Manual v2 - Manual (Page 10)

6 3S-3000HD Table of Contents Index Great Plains Manufacturing, Inc.
195-068M Table of Contents Index 2014-02-11
Safety Decals
Safety Reflectors and Decals
Your drill comes equipped with all lights, safety reflectors
and decals in place. They were designed to help you
safely operate your drill.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
FigureSpacer
818-055C
Slow Moving Vehicle Reflector
Center of rear center section;
1 total
FigureSpacer
838-266C
Red Reflectors
On wing walkboard inside end faces;
2 total
FigureSpacer
FigureSpacer
15568
FigureSpacer
26496