Great Plains 3S-3000HDF Operator Manual v2 - Manual (Page 41)

Great Plains Manufacturing, Inc. Table of Contents Index Operating Instructions 37
2014-02-11 Table of Contents Index 195-068M
Divided Capacities
Divider Removal
Refer to Figure 31
a.
Remove 5 ⁄
16
in bolts and flange nuts from tabs
at each end of drill box (2 locations).
b. Remove 5 ⁄
16
in bolts and nuts from lid-hinge
brackets (3 locations).
c. Loosen but do not remove 1 ⁄
4
in bolts and nuts that
clamp the lid assembly angle irons to the plastic
dividers .
d. Lift lid assembly out of drill box. Lift dividers out
of drill box. Reinstall standard or offset dividers.
e. Reinstall lid assembly by reversing step d through
step a.
FigureSpacer
Refer to Figure 32
6.
Check that the seed/fertilizer flap is closed so seed
and fertilizer cannot pass between compartments.
Flap flips forward to block passage. The flap top
edge is secured to the dividers. Rotate the bent clips
to engage the edge of the flap, and tighten the
knobs.
FigureSpacer
Capacity Ratio Total Capacity
Seed Fertilizer Seed Fertilizer
None 100% 0% 92.7 bu
3267 ltr.
0
Standard 60% 40% 55.6 bu
1960 ltr.
37.1 bu
1307 ltr.
Offset
to Back 68% 32% 63.0 bu
2221 ltr.
29.7 bu
1045 ltr.
Offset
Forward 55% 45% 51.0 bu
1797 ltr.
41.7 bu
1470 ltr.
FigureSpacer
Figure 31
Box Divider Removal
27050
1
3
2
3
2
1
4
5
6
7
8
9
1 2
3
4 5
6
7
8
9
8 9
FigureSpacer
Figure 32
Seed/Fertilizer Flap Closed
16383