Great Plains 3S-3000HDF Operator Manual v2 - Manual (Page 62)

58 3S-3000HD Table of Contents Index Great Plains Manufacturing, Inc.
195-068M Table of Contents Index 2014-02-11
Opener Depth (Press Wheel Height)
Refer to Figure 60
Set opener seeding depth
by adjusting press-wheel
height .
To adjust, first raise openers slightly, then lift and slide T
handles
on top of openers Adjust all press wheels to
the same height.
• Each increment of the handle adjusts the seeding
depth by approximately 1 ⁄
4
in (6.3mm). The range is
approximately 0 to 3 1 ⁄
2
in (0-8.9cm) seeding depth.
• For more shallow seeding, slide T handles forward
toward implement.
• For deeper seeding, slide T handles backward
away from implement.
If press wheels are lifting off ground, increase hydraulic
down pressure.
If press wheels are digging into ground, reduce hydraulic
down pressure.
FigureSpacer
Figure 60
Adjusting 00HD Opener Depth
26441
1
2
B
F
1
2
2
F
B