Great Plains 3S-3000HDF Operator Manual v2 - Manual (Page 50)

46 3S-3000HD Table of Contents Index Great Plains Manufacturing, Inc.
195-068M Table of Contents Index 2014-02-11
Storage
Store the drill where children do not play. If possible,
store it inside for longer life.
1. Perform the drill Parking checklist.
2. If storing with openers lowered, disconnect seed
hoses at openers to prevent deformation.
3. Lubricate the drill at all points listed under “Lubrica-
tion” on page 83.
4. Check all bolts, pins, fittings and hoses. Tighten,
repair or replace parts as needed.
5. Check all moving parts for wear or damage. Make
notes of any parts needing repair before the next
season.
6. Plug or cap seed delivery and fertilizer tubes to pre-
vent pest entry.
7. Apply grease to exposed cylinder rods to prevent
rust.
8. Use touch-up paint to cover scratches, chips and
worn areas to prevent rust.
End of Operating Instructions