Great Plains Swath Command Section Control - Manual (Page 25)

2012-08-23 Table of Contents Index 402-382M
Great Plains Manufacturing, Inc. Table of Contents Index 21
Install Air Tank(s)
Refer to Figure 19
The solenoid valves now installed are supplied by one or
two air tanks
.
Start at the left side of the planter. A section may have
one tank or no tank.
124. Consult the clutch layout drawing for the kit
(page 48 through page 132). Note locations of any:
823-329C TRU-COUNT AIR TANK ASM
If none, move to the next section.
125. Select one each new:
402-535D TRU-COUNT AIR TANK MOUNT PLATE
and two sets new:
802-017C HHCS 3/8-16X1 GR5
804-013C WASHER LOCK SPRING 3/8 PLT
803-014C NUT HEX 3/8-16 PLT
At the location shown in the layout, secure the
plate
to the left side of the opener using the
bolts , lock washers and nuts .
126. Select one new:
823-329C TRU-COUNT AIR TANK ASM
and two sets new:
802-014C HHCS 3/8-16X3/4 GR5
804-013C WASHER LOCK SPRING 3/8 PLT
803-014C NUT HEX 3/8-16 PLT
127. Repeat step 124 through step 126 for the next tank,
if any.
Figure 19
Air Tank Mount
34085
262
197
224
245
238
262
245
238
U
D
L
R
B
F
262
262
197
224
245
238
197
224 245 238
262
223
245
238