Great Plains Swath Command Section Control User Manual
Page 3
Great Plains Manufacturing, Inc.
iii
2012-08-23
402-382M
©
Copyright 2012 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.
Registered Trademarks of Great Plains Manufacturing, Inc. include:
Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,
Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information ......................................1
General Information .....................................................3
Prerequisites ..................................................................3
Components ...................................................................3
Additional Components Always Required ......................3
Additional Components That May Be Required .............3
Related Documents........................................................5
Notations and Conventions ............................................5
Call-Outs ....................................................................5
Prepare Planter.............................................................6
Verify Compatibility.........................................................6
Tools Required ...............................................................7
Replace Electric Clutches ...........................................8
Install Air Clutches.......................................................9
Install Center Air Clutches..............................................9
Assess The Center Shaft............................................9
Remove Center Shaft ...............................................10
Remove Bearings (Conditional)............................10
Attach Locator Tools ................................................10
Install Center Air Clutches ........................................11
Align Center Shaft ................................................11
Install Wing Air Clutches ..............................................12
Assess The Wing Shaft ............................................12
Remove Wing Shaft..................................................13
Remove Bearings (Conditional)............................13
Attach Locator Tools ................................................13
Install Wing Air Clutches...........................................14
Align Wing Shaft ...................................................14
Install H.T. Mount Bracket(s) ....................................15
Pull-Type 3-Point Compressor Installation ...................17
3PYP and 3PYPA Compressor Installation..................18
Install Compressor (3PYP) .......................................18
Install Compressor Covers (3PYP) .......................... 18
Install Valve Blocks ................................................... 19
Install Air Tank(s) ....................................................... 21
Install Air Lines .......................................................... 22
Install Row Air Lines .................................................... 22
Install Section Air Lines................................................ 23
Install Supply Air Lines................................................. 23
Fish Line Bind .......................................................... 23
Connect Valve Blocks .................................................. 25
Secure Tubing and Harnesses .................................... 25
System Set Up ............................................................ 26
Implement Considerations ........................................... 26
Install Tractor Components .......................................... 26
Relocate Standard Compressor............................... 26
Inlet Air Hose Specification .................................. 26
Mount Pressure Gauge ............................................ 27
Connect Compressor Air Lines ................................ 27
Install Satellite Receiver........................................... 28
Install Cab Components............................................... 28
Install Air Inlet Filter.................................................. 28
Install Control Terminal ............................................ 29
Connect Cab Harnesses .......................................... 29
System Harness Diagram (Option 57) ......................... 30
System Harness Diagram (Kit) .................................... 31
IntelliAg
PDC Setup ................................................. 32
Appendix A - Reference Information........................ 33
Torque Values Chart .................................................... 33
Clutch Exploded Views ................................................ 34
823-327C Right Hand (RH) Air Clutch ..................... 34
823-328C Left hand (LH) Air Clutch......................... 35
402-273K Single-Row Left Hand.............................. 36
402-273K-ASY: 402-273K Installation Details ......... 37