Great Plains Swath Command Section Control - Manual (Page 34)

30 Swath Command™ Table of Contents Index Great Plains Manufacturing, Inc.
402-382M Table of Contents Index 2012-08-23
System Harness Diagram (Option 57)
This diagram shows the factory-installed configuration,
plus optional GPS receiver. The components changed or added for
Swath Command™ are outlined with dashes.
Hitch Extension
Harness
46798013x
Battery
Tractor
Power
Harness
467980455
ISO
Tractor
Hitch
GPS Receiver
(See Note)
WSMB
Tru Count
Output Module
Tru Count
Clutch Harness
467983505
Tru Count
Solenoid
Modules
WSMT 2 ‘T’ Harness
467980850
WSMT 2
PDC Module
CAN Terminator
IntelliAg AI120
Virtual Terminal
CFM Switch
Module
Tractor ECU
Master
Switch
Tractor A1
Harness
467980451A
CFM to
CAN Harness
467980330
NOTE: The GPS receiver connects
to the cab harness RS232 port.
Refer to Auto Section Control
Setup to transmit GPS signal
directly over CANbus.
Figure 31
Option 57 / AI120 Harness Diagram
32485