Great Plains CDA600 Parts Manual - Manual (Page 113)

Revision Comments Part Description Part No. Ref.
Image No. dwg34205
2 X 13 PRESS WHEEL ASSEMBLY 814-157C 1.
WASHER FLAT M10 PLT 804-162C 2.
NUT HEX NYLOCK M10X1.5 PLT 803-280C 3.
WASHER FLAT 5/8 BRASS 804-122C 4.
HHCS 5/8-11X3 1/4 GR5 802-160C 5.
U-BOLT M10X1.5 X 56 X 31 806-249C 6.
PRESS WHEEL TINE MNT 270-151H 7.
NUT HEX NYLOCK M8X1.25 PLT 803-278C 8.
2X13 ADJ PRESS WHEEL SCRAPER 270-331D 9.
RHSNB M8X1.25X20 GR8.8 802-960C 10.
HHCS M20X2.5X130 GR8.8 842-205C 11.
COIL TINE - 14X3 3/4X3/8 807-319C 12.
NUT HEX NYLOCK M20X2.5 803-393C 13.
Includes items 2-13 125MM TINE/SCRAPER - 2X13 270-150K 14.
Includes items 2-7 & 11-13 125MM TINE ONLY - 2X13 270-156K 15.
COIL TINE - 14X6 1/2X3/8 807-318C 16.
Includes items 2-7, 11, 13 & 16 167MM TINE ONLY - 2 X13 270-157K 17.
Includes items 2-11, 13 & 16 167MM TINE/SCRAPER - 2X13 270-158K 18.
PRESS WHEEL SCRAPER ARM 270-334D 19.
Includes items 3-6, 8-10 & 19 2X13 PRESS WHEEL SCRAPER KIT 270-140K 20.
07/23/14 - 113 - 270-600P
Table of Contents Part Number Index
Press Wheels
2" x 13" Tine/Scraper Mounting
(Applies to CDA600 only)