Great Plains CDA600 Parts Manual - Manual (Page 49)

Revision Comments Part Description Part No. Ref.
Image No. dwg34387
Shown. LH WING 6M LFT WLDMT 270-104H 1.
RH WING 6M RHT WLDMT 270-109H 1.
U-BOLT M16-2.00 X 102 X 140 806-226C 2.
CYL LUG WLDMT 270-007H 3.
PIN 25MM X 91MM SQ HEAD 270-009H 4.
NUT HEX M16X2.00 NYLON INSERT 803-282C 5.
ARM TRCK ERAD TOOLBAR MNT 270-047D 6.
CYL 50MMX150MMX30MM 810-759C 7.
ROLL PIN 8MM X 50MM PLT 805-452C 8.
PIN 25MM X 65MM NON-ROTATE 270-010H 9.
BUSHING 40X32X15MM HARD SPLT 891-270C 10.
NUT HEX NYLOCK M10X1.5 PLT 803-280C 11.
PIN 32MM X 95MM 270-051D 12.
HHCS M10X1.5X65 GR8.8 802-950C 13.
Shown. LH TOOLBAR TRK ERADICATOR LFT WEL 270-015H 14.
RH TOOLBAR TRK ERADICATOR RHT 270-008H 14.
HHCS M16X2X70 GR8.8 802-983C 15.
Refer to Track Eradicator (270-026K)
for breakdown
TRACK ERADICATOR ASM 270-026K 16.
U-BOLT M16-2.00 X 77 X 115 806-225C 17.
HHCS M16X2X45 GR8.8 802-982C 18.
WASHER 1/4BSPP BONDED 841-794C 19.
AD 1/4MBSPP 1/4MBSPP 841-802C 20.
07/23/14 - 49 - 270-600P
Table of Contents Part Number Index
Frame
Track Eradicator Mounting
(Applies to CDA600 only)