Great Plains CDA600 Parts Manual - Manual (Page 29)

Revision Comments Part Description Part No. Ref.
Image No. dwg34136
HHCS M10X1.5X70 GR8.8 802-975C 1.
BUSH SPRUNG - Ø45XØ36X40 827-129C 2.
LINKAGE PIN GREASABLE 603-511D 3.
NUT HEX NYLOCK M10X1.5 PLT 803-280C 4.
LINKAGE ADAPTOR 603-001H 5.
WASHER FLAT M45 PLT 804-268C 6.
NUT SLOTTED M45X3 803-437C 7.
PIN SPLIT Ø5X75 805-467C 8.
BALL CAT 3 LOWER ?37 827-113C 9.
LYNCH PIN CAT 3 805-468C 10.
HITCH CROSSBAR - CAT 3 603-084H 11.
PARK STAND 70SQIN 270-051H 12.
PIN Ø20X115 270-539D 13.
LYNCH PIN CAT 2 805-460C 14.
1/8" BSP GREASE NIPPLE 45? 800-437C 15.
HHCS M20X2.50X110 GR8.8 802-965C 16.
NUT HEX NYLOCK M20X2.5 803-393C 17.
BOLT M45X3X275 603-145H 18.
SWIVEL WLDMT 270-097H 19.
ROLL PIN 8MM X 50MM PLT 805-452C 20.
TOWER HYD HOSE HOLDER 270-056H 21.
HHCS M8X1.25X15 GR8.8 802-974C 22.
NUT HEX NYLOCK M8X1.25 PLT 803-278C 23.
HITCH 94" 270-048H 24.
STEP BOLT-ON 270-096H 25.
HHCS M16X2X50 GR8.8 842-033C 26.
NUT HEX NYLOCK M16X2.00 GRB PT 803-282C 27.
HHCS M20X2.50X190 GR12.9 802-964C 28.
FRAME CENTER WLDMT 270-117H 29.
HITCH CROSSBAR - CAT 4 603-085H 30.
BUSH Ø65XØ45X5 603-530D 31.
AD 1/4MBSPP BLKHD W/LN 841-789C 32.
AD 1/2MSBPP BLKHD W/LN 841-787C 33.
07/23/14 - 29 - 270-600P
Table of Contents Part Number Index
Frame
Hitch to Frame
(Applies to CDA600 only)