Great Plains CDA600 Parts Manual - Manual (Page 43)

Revision Comments Part Description Part No. Ref.
Image No. dwg34396
WING 6M RHT WLDMT 270-109H 1.
HHCS M16X2X45 GR8.8 802-982C 2.
PLT POSITION INDICATOR 270-266D 3.
HHCS M12X1.25X20 GR8.8 802-976C 4.
Refer to Toolbar Assembly RH
(270-200V) & (200-201V) for
breakdown
CUL TLBR ASSM 6M RHT FRNT 270-200V 5.
HHCS M16X2X30 GR8.8 802-981C 6.
MOUNT TOOLBAR WLDMT 270-057H 7.
NUT HEX M16X2.00 NYLON INSERT 803-282C 8.
RETAINER BRG WLDMT 270-092H 9.
TOOLBAR LEVELING BRD 6M WING R 270-058H 10.
MOUNT TOOLBAR PLASTIC 270-001D 11.
NUT HEX NYLOCK M12X1.75 PLT 803-281C 12.
ARM INDICATOR 270-265D 13.
HHCS M12X1.75X35 GR8.8 802-613C 14.
PIN 25MM X 100MM NON-ROTATE 270-153H 15.
ROLL PIN 8MM X 50MM PLT 805-452C 16.
CYL 50MM X 125MM X 30MM 810-758C 17.
Refer to Toolbar Assembly RH
(270-200V) & (200-201V) for
breakdown
CULT TLBR ASSM 6M RHT REAR 270-201V 18.
BRKT TOOLBAR 2.5 OFFSET WLDMT 270-045H 19.
BRACKET TOOLBAR END 270-037H 20.
CYL REP 60MM X 200MM X 32MM 810-761C 21.
PIN 25MM X 90MM NON-ROTATE 270-107H 22.
ARM LINK WLEMT 270-044H 23.
PIN 25MM X 91MM SQ HEAD 270-009H 24.
PIN 25MM X 53MM FIXED 270-106H 25.
CYL REP 50.8MM X 200MM X 30MM 810-762C 26.
ARM DEPTH INDICATOR 270-268D 27.
WASHER 3/8BSPP BONDED 841-793C 28.
AD 3/8MBSPP 3/8MBSPP 841-801C 29.
PLUG 3/8BSPP HOLLOW HEX 841-786C 30.
07/23/14 - 43 - 270-600P
Table of Contents Part Number Index
Frame
Right Wing Front Assembly
(Applies to CDA600 only)