Great Plains CDA600 Parts Manual - Manual (Page 59)

Revision Comments Part Description Part No. Ref.
Image No. dwg34223
CULT DRILL TARP - 113X50 891-284C 1.
HANDLE BENT STAINLESS 5/8 RND 270-472D 2.
CRANK MNT 20 SPLINE 834-262C 3.
PIN, ROLL 1/4 X 1 1/4 LONG 805-208C 4.
Includes items 2-4 CRANK HANDLE - CULT DRILL TARP 270-181L 5.
HHCS M6X1X15 GR8.8 PLT 802-741C 6.
STRAP - ROPE RETAINER 891-286C 7.
STOB - 5/8 OD 20 SPLINE 270-180H 8.
TUBE 1 1/8 OD X 110 1/2 LG 270-473D 9.
HHCS M6X1X50 GR8.8 802-953C 10.
PLASTIC U-CLAMP 817-941C 11.
PAN HD SELF DRILL M6.3X1.8X19 801-239C 12.
STOB 15/16 INSERT 7/16 HOLE 270-036D 13.
HHCS M6X1X35 GR8.8 802-952C 14.
HHCS M8X1.25X20 GR8.8 802-314C 15.
PLATE TARP ROD AND BUNGEE HOLD 270-032D 16.
NUT HEX NYLOCK M8X1.25 PLT 803-278C 17.
TUBE 1 1/8 X 13G WL X 107.75 270-033D 18.
CLAMP TARP HOLD DOWN 270-031D 19.
ROD SS M10 THD ENDS 270-005H 20.
HSBHCS M10X1.50X40 SS 802-971C 21.
ALUMINUM TARP LATCH PLATE 270-034D 22.
STRAP BENT HANDLE STOP 270-035D 23.
HSBHCS M8X1.25X25 SS 802-968C 24.
NUT HEX NYLOCK M6X1 803-386C 25.
HSBHCS M6X1.00X25 SS 802-970C 26.
WASHER SPRING LOCK M10 PLT 804-158C 27.
07/23/14 - 59 - 270-600P
Table of Contents Part Number Index
Hopper
Hopper Tarp Cover Assembly
(Applies to CDA600 only)