Great Plains CDA600 Parts Manual - Manual (Page 33)

Revision Comments Part Description Part No. Ref.
Image No. dwg34138
WING 6M LFT WLDMT 270-104H 1.
HHCS M16X2X45 GR8.8 802-982C 2.
NUT HEX M16X2.00 NYLON INSERT 803-282C 3.
TOOLBAR LVL BRD 6M LFT WING 270-042H 4.
MOUNT TOOLBAR PLASTIC 270-001D 5.
RETAINER BRG WLDMT 270-092H 6.
MOUNT TOOLBAR WLDMT 270-057H 7.
HHCS M16X2X30 GR8.8 802-981C 8.
BRKT TOOLBAR 2.5 OFFSET WLDMT 270-045H 9.
CYL 50MM X 125MM X 30MM 810-758C 10.
ROLL PIN 8MM X 50MM PLT 805-452C 11.
PIN 25MM X 65MM NON-ROTATE 270-010H 12.
PIN 25MM X 53MM FIXED 270-106H 13.
Refer to Coulter Toolbar Assembly for
breakdown
CULT TLBR ASSM 6M LFT REAR 270-195V 14.
PIN 25MM X 90MM NON-ROTATE 270-107H 15.
ARM LINK WLEMT 270-044H 16.
CYL REP 50.8MM X 200MM X 30MM 810-762C 17.
CYL REP 60MM X 200MM X 32MM 810-761C 18.
PIN 25MM X 91MM SQ HEAD 270-009H 19.
Refer to Coulter Toolbar Assembly for
breakdown
CULT TLBR ASSM 6M LFT FRNT 270-194V 20.
HHCS M16X2X70 GR8.8 802-983C 21.
PLT DISC GANG MNT 2.5 OFFST IN 270-046H 22.
WASHER 3/8BSPP BONDED 841-793C 23.
AD 3/8MBSPP 3/8MBSPP 841-801C 24.
PLUG 3/8BSPP HOLLOW HEX 841-786C 25.
07/23/14 - 33 - 270-600P
Table of Contents Part Number Index
Frame
Left Wing Front Assembly
(Applies to CDA600 only)