Great Plains CDA600 Parts Manual - Manual (Page 35)

Revision Comments Part Description Part No. Ref.
Image No. dwg34150
MARKER TUBE WELDMENT RH 270-116H 1.
NUT HEX NYLOCK M6X1 803-386C 2.
HHCS M6X1X35 GR8.8 802-952C 3.
PIVOT SPACER 270-362D 4.
MARKER TUBE WELDMENT LH 270-115H 5.
NUT HEX NYLOCK M8X1.25 PLT 803-278C 6.
HHCS M8X1.25X20 GR8.8 802-314C 7.
LIGHT BOARD FR/RL 833-569C 8.
LIGHT UNIT FRONT C/W LEAD 833-570C 9.
WASHER LOCK M6 PLT 804-226C 10.
HHCS M6X1X30 GR8.8 802-954C 11.
NUT HEX M10X1.5 PLT 803-279C 12.
MOUNT SIGN B-OUT 1 1/2" TUBE 270-524D 13.
U-BOLT M10X1.5X66X35 806-234C 14.
U-BOLT M16-2.00 X 64 X 100 806-230C 15.
BEACON MOUNT PLATE 270-465D 16.
NUT HEX NYLOCK M16X2.00 GRB PT 803-282C 17.
LIGHT ASM P15559 18.
FLASHING BECON P15567 19.
REFLECTOR- RED P05796 20.
DECAL MOUNT - SPEED 1020644 21.
SIGN - SPEED LIMIT P16838 22.
MARKER BOARD MNT, REAR RH 270-184H 23.
MARKER BOARD MNT, REAR LH 270-186H 24.
NUT HEX NYLOCK M5X.8 803-390C 25.
HSHCS M5X.8X20 304 SS 802-957C 26.
PLATE 30MM AND 9MM HOLES 270-579D 27.
HHCS M8X1.25X70 GR 8.8 802-730C 28.
NUT HEX 8MM STD PITCH 803-262C 29.
07/23/14 - 35 - 270-600P
Table of Contents Part Number Index
Frame
Lights
(Applies to CDA600 only)