Bio-Rad BioLogic LP System - Manual (Page 10)

2. Connect the fraction collector to the BioLogic LP system using system
cable 3 as shown in Figure 3. Note: Both ends of cable 3 are identical.
a. Connect one of the cable’s mini-DIN connector to the REC port on
the fraction collector.
b. Connect the other mini-DIN connector to the port labeled Diverter
Valve on the BioLogic LP system.
Fig. 3.
Section 8
Connecting a Model 2110 Fraction
Collector
To connect the Model 2110 fraction collector to the BioLogic LP system,
you will need an SVT 3-2 diverter valve and system cable 1.
3. Connect the fraction collector to the BioLogic LP system using system
cable 1.
a. Connect the cable’s DB-9 connector to the port on the fraction
collector.
b. Connect the mini-DIN connector to the port labeled Fraction
Collector on the BioLogic LP system.
4. The diverter valve port diverts flow from the fraction collector during
non-collection periods
System cable 3
System cable 15
BioFrac
fraction collector
Biologic LP system
6
4006073D.qxp 8/17/2009 7:45 AM Page 6