Led function summary matrix – Motorola 3347 User Manual

Page 159

Advertising
background image

159

Status Indicator Lights

LED Function Summary Matrix

If a status indicator light does not look correct, look for these possible problems:

Power

DSL

Internet

Ethernet Wireless

Unlit

No power

No signal

No signal

No signal

No signal

Solid
Green

Power on

Internet con-
nection is
established.

Router is con-
nected.

Synched with
Ethernet card

Synched with
WLAN

Flashing
Green

N/A

Activity on the
DSL cable

Transmitting
or receiving
data.

Activity on the
Ethernet
cable

Activity on the
WLAN

Red

Updating
embedded
software, or
for system
failure.

N/A

N/A

Bad userid
and pass-
word are
entered.

N/A

If LED is

not Lit

Possible problems

Power

•

Make sure the power switch is in the ON position.

•

Make sure the power adapter is plugged into the DSL Router properly.

•

Try a known good wall outlet.

•

Replace the power supply and/or unit.

DSL

•

Make sure that any telephone has a microfilter installed.

•

Make sure the you are using the correct cable. The DSL cable is the thinner standard tele-
phone cable.

•

Make sure the DSL cable is plugged into the correct wall jack.

•

Make sure the DSL cable is plugged into the DSL port on the DSL Router.

•

Make sure the DSL line has been activated at the central office DSLAM.

•

Make sure the DSL Router is not plugged into a micro filter.

•

Launch a browser and try to browse the Internet. If the DSL Active light still does not flash,
then proceed to Advanced Troubleshooting.

Advertising