Motorola 3347 User Manual
Page 278
278
set wireless mode { both-b-and-g | b-only | g-only }
Specifies the wireless operating mode for connecting wireless clients:
both-b-and-g, b-
only, or g-only, and locks the Gateway in that mode.
☛
NOTE:
If you choose to limit the operating mode to B or G only, clients using the
mode you excluded will not be able to connect.
set wireless multi-ssid option { on | off }
Enables or disables the
multi-ssid feature which allows you to add additional network
identifiers (SSIDs or Network Names) for your wireless network. When enabled, you can
specify up to three additional SSIDs with separate privacy settings for each. See below.
set wireless multi-ssid {second-ssid | third-ssid | fourth-ssid }
name
Specifies a descriptive name for each SSID. when
multi-ssid option is set to on.
set wireless multi-ssid second-ssid-privacy { off | WEP | WPA-PSK |
WPA-802.1x }
set wireless multi-ssid third-ssid-privacy { off | WEP | WPA-PSK |
WPA-802.1x }
set wireless multi-ssid fourth-ssid-privacy { off | WEP | WPA-PSK |
WPA-802.1x }
Specifies the type of privacy enabled on multiple SSIDs when
multi-ssid option is set to
on. off = no privacy; WEP = WEP encryption; WPA-PSK = Wireless Protected Access/Pre-
Shared Key; WPA-802.1x = Wireless Protected Access/802.1x authentication. See
less Privacy Settings” on page 284
for more information.
☛
NOTE:
WEP is suppor ted on only one SSID at a time, and will not be available if
another SSID already has it configured.