Motorola 3347 User Manual
Page 256
256
☛
NOTE:
The Gateway’s WAN DHCP client por t in SilentRunning mode is
enabled. This
feature allows end users to continue using DHCP-ser ved IP addresses from
their Ser vice Providers, while having no identifiable presence on the Internet.
SafeHarbour IPSec Settings
SafeHarbour VPN is a tunnel between the local network and another geographically dis-
persed network that is interconnected over the Internet. This VPN tunnel provides a
secure, cost-effective alternative to dedicated leased lines. Internet Protocol Security
(IPsec) is a series of ser vices including encr yption, authentication, integrity, and replay pro-
tection. Internet Key Exchange (IKE) is the key management protocol of IPsec that estab-
lishes keys for encr yption and decr yption. Because this VPN software implementation is
built to these standards, the other side of the tunnel can be either another Motorola Neto-
pia® unit or another IPsec/IKE based security product. For VPN you can choose to have
traffic authenticated, encr ypted, or both.
When connecting the Motorola Netopia® unit in a telecommuting scenario, the corporate
VPN settings will dictate the settings to be used in the Motorola Netopia® unit. If a param-
eter has not been specified from the other end of the tunnel, choose the default unless you
fully understand the ramifications of your parameter choice.
set security ipsec option (off) {on | off}
Turns on the SafeHarbour IPsec tunnel capability. Default is off. See
for more information.
68
DHCP ser ver
Enabled
Enabled
Enabled
161
snmp
Enabled
Enabled
Enabled
ping (ICMP)
Enabled
Enabled
WAN - Disabled
LAN -
Local Address
Only