Motorola 3347 User Manual
Page 264
Advertising
264
exposed-address# "
n
" protocol [ tcp | udp | both | any ]
Sets the protocol for the stateful inspection feature for the exposed address list. Accepted
values for protocol are tcp, udp, both, or any.
If protocol is not any, you can set por t ranges:
set security state-insp xposed-addr
exposed-address# "
n
" start-port [ 1 - 65535 ]
set security state-insp xposed-addr
exposed-address# "
n
" end-port [ 1 - 65535 ]
Advertising