Motorola 3347 - Manual (Page 92)

92
• Service Name: A unique identifier for the Custom Service.
• Global Port Range: Range of ports on which incoming traffic will be received.
• Base Host Port: The port number at the start of the port range your Router should use
when for warding traffic of the specified type(s) to the internal IP address.
• Protocol: Protocol type of Internet traffic, TCP or UDP.
Click the Next button.
If you chose Trigger Por ts, the Trigger Por ts entr y screen appears.
Trigger Por ts for wards a range of por ts to an IP address on the LAN only after specific out-
bound traffic “triggers” the feature. Enter the following information:
• Service Name: A unique identifier for the Custom Service.
• Global Port Range: Range of ports on which incoming traffic will be received.
• Local Trigger Port: Port number of the type of outbound traffic that needs to happen
(will be the trigger) to then allow the configured por ts for inbound traffic.
Example: Set the trigger port to 21 and configure a range of 25 – 110. You would need
to do an outbound ftp before you were able to do an inbound smtp.
Click the Next button.