Motorola 3347 - Manual (Page 285)

285
CONFIG Commands
For simplicity, it is easiest to have both the Gateway and the client transmit with the same
key. The default is
1.
set wireless network-id privacy encryption-key1-length
{40/64bit, 128bit, 256bit}
set wireless network-id privacy encryption-key2-length
{40/64bit, 128bit, 256bit}
set wireless network-id privacy encryption-key3-length
{40/64bit, 128bit, 256bit}
set wireless network-id privacy encryption-key4-length
{40/64bit, 128bit, 256bit}
Selects the length of each encr yption key. 40bit encr yption is equivalent to 64bit encr yp-
tion. The longer the key, the stronger the encr yption and the more difficult it is to break the
encr yption.
set wireless network-id privacy encryption-key1 { hexadecimal digits }
set wireless network-id privacy encryption-key2 { hexadecimal digits }
set wireless network-id privacy encryption-key3 { hexadecimal digits }
set wireless network-id privacy encryption-key4 { hexadecimal digits }
The encr yption keys. Enter keys using hexadecimal digits. For 40/64bit encr yption, you
need 10 digits; 26 digits for 128bit, and 58 digits for 256bit WEP. Valid hexadecimal char-
acters are 0 – 9, a – f.
Example 40bit key: 02468ACE02.
Example 128bit key: 0123456789ABCDEF0123456789.
Example 256bit key:
592CA140F0A238B0C61AE162F592CA140F0A238B0C61AE162F21A09C.
You must set at least one of these keys, indicated by the default-keyid.
Wireless MAC Address Authorization Settings
set wireless mac-auth option { on | off }
Enabling this feature limits the MAC addresses that are allowed to access the LAN as well
as the WAN to specified MAC (hardware) addresses.