Motorola 3347 - Manual (Page 267)

267
CONFIG Commands
set snmp v3 ro-account security-name string
Adds the specified 1 – 32 character name string as the name of the Read-Only user.
set snmp v3 ro-account security-model [ none | auth | auth+priv ]
Sets the security model for the Read-Only account: none, authentication, or authentication
plus privacy.
• none specifies no authentication or encryption;
• auth (authentication, no encryption) requires a security name and authentication pass-
word, and a specified authentication protocol;
• auth+priv (authentication plus privacy DES encryption) requires authentication plus a
privacy password.
set snmp v3 ro-account auth-protocol [ md5 | sha ]
Specifies the authentication protocol for the Read-Only account: md5 (HMAC-MD5 authenti-
cation) or sha (HMAC-SHA authentication), if the security model is set to auth or
auth+priv.
set snmp v3 ro-account auth-password
Specifies the authentication password, a 1 – 32 character string, for the Read-Only
account, if the security model is set to
auth or auth+priv. You are prompted for a new
password and then to repeat the password. If there is an existing password, the user must
enter the old password, then the new password, and repeat it.
set snmp v3 ro-account priv-password
Specifies the privacy password, a 1 – 32 character string, for the Read-Only account, if the
security model is set to
auth+priv. You are prompted for a new password and then to
repeat the password. If there is an existing password, the user must enter the old pass-
word, then the new password, and repeat it.
set snmp v3 ro-account localize-keys [ off | on ]
Determines whether or not the generated keys should be localized (hashed) with the
Engine ID for the Read-Only account, if the security model is set to
auth+priv.