Motorola 3347 - Manual (Page 97)

97
Links Bar
3. Check the Enable IPSec checkbox.
4. Click Add .
The Tunnel Configuration page appears.
5. Enter the tunnel Name .
This parameter does not have to match the peer/remote VPN device.
6. Enter the initial group of tunnel parameters.
Refer to your “IPSec Tunnel Details Parameter Setup Worksheet” on page 96 and the
“Parameter Descriptions” on page 100 as required.
Select the Encryption Protocol from the pull-down menu.
Select the Authentication Protocol from the pull-down menu.
If you choose Aggressive from the Negotiation Method pull-down menu, additional
fields appear for you to supply applicable parameter information.