Connect to a network, Supported network protocols, Install the product on a wired network – HP Laserjet p1606dn User Manual
Connect to a network
The HP LaserJet Professional P1600 printer series can connect to networks through the HP internal
Supported network protocols
To connect a networking-equipped product to your network, you need a network that uses the following
Functional wired TCP/IP network
Install the product on a wired network
To resolve network connection problems, see
You can install the product on a network by using the HP Smart Install or from the product CD. Before
you begin the installation process, do the following:
Connect the CAT-5 Ethernet cable to an available port on the Ethernet hub or router.
Connect the Ethernet cable to the Ethernet port on the back of the product.
Verify that one of the network lights is illuminated on the network port located on the back of the
Chapter 4 Connect the product