HP Laserjet p1606dn - Manual (Page 110)

Toner smear
● If toner smears appear on the leading edge of the
media, the media guides might be dirty. Wipe the media
guides with a dry, lint-free cloth.
● Check the media type and quality.
● The fuser temperature might be too low. In your printer
driver, make sure the appropriate media type is selected.
● Place the product in quiet mode, and send the print job
again. See
Quiet mode settings on page 59 .
● Install a new genuine HP print cartridge.
Loose toner
● The fuser temperature might be too low. In your printer
driver, make sure the appropriate media type is selected.
● Clean the inside of the product.
● Check the media type and quality.
● Place the product in quiet mode, and send the print job
again. See
Quiet mode settings on page 59 .
● Plug the printer directly into an AC outlet instead of into
a power strip.
Vertical repetitive defects
● The print cartridge might be damaged. If a repetitive
mark occurs at the same spot on the page, install a new
genuine HP print cartridge.
● The internal parts might have toner on them. If the defects
occur on the back of the page, the problem will
probably correct itself after a few more printed pages.
● In your printer driver, make sure the appropriate media
type is selected.
98 Chapter 8 Solve problems ENWW