Clean the product, Clean the pickup roller – HP Laserjet p1606dn User Manual

Page 83

Advertising
background image

Clean the product

Clean the pickup roller

If you want to clean the pickup roller before deciding to replace it, follow these instructions:

1.

Unplug the power cord from the product, and then remove the pickup roller as described in

Replace the pickup roller on page 65

.

2.

Dab a lint-free cloth in isopropyl alcohol, and then scrub the roller.

WARNING!

Alcohol is flammable. Keep the alcohol and cloth away from an open flame.

Before you close the product and plug in the power cord, allow the alcohol to dry completely.

NOTE:

In certain areas of California, air pollution control regulations restrict the use of liquid

isopropyl alcohol (IPA) as a cleaning agent. In those areas of California, please disregard the

previous recommendations and use a dry, lint-free cloth, moistened with water, to clean the pickup

roller.

3.

Use a dry, lint-free cloth, to wipe the pickup roller and remove loose dirt.

4.

Allow the pickup roller to dry completely before you reinstall it in the product.

5.

Plug the power cord into the product.

ENWW

Clean the product

71

Advertising
This manual is related to the following products: