Canon PIXMA MX870 - Manual (Page 172)

Cannot Install the MP Drivers
Cannot Connect to Computer with a USB Cable Properly
Printing or Scanning Speed Is Slow/Hi-Speed USB
Connection Does Not Work/"This device can perform
faster" Message Is Displayed
Print Results Not Satisfactory
Cannot Print to End of Job
Part of the Page Is Not Printed
No Printing Results/Printing Is Blurred/Colors Are Wrong/
White Streaks
Lines Are Misaligned
Printed Paper Curls or Has Ink Blots
Paper Is Smudged/Printed Surface Is Scratched
Back of the Paper Is Smudged
Vertical Lines Are Printed on the Sides of the Printout
Colors Are Uneven or Streaked
Printing Does Not Start
Copying/Printing Stops Before It Is Completed
Machine Moves But Ink Is Not Ejected
Printing Speed Is Not as Fast as Expected
Print Head Holder Does Not Move to the Position for
Replacing
Paper Does Not Feed Properly
Paper Does Not Feed from the Paper Source Specified in the
Printer Driver
Paper Jams
Paper Is Jammed in the Paper Output Slot or the Rear
Tray
Paper Is Jammed inside the Machine at the Transport
Unit
Jammed Paper Is Not Removed out When Automatic
Duplex Printing
In Other Cases
Document Jams in the ADF
If the Stop button is pressed while the machine is
scanning the document:
Removing the jammed document from the Document
Tray:
Removing the jammed document from the inner side of
the Document Cover:
Removing the jammed document from the Document
Output Slot:
Message Appears on the Computer Screen
Error Number: B200 A printer error has occurred. Turn the
printer off and unplug the power cord of the printer from
the power supply. Then contact the service center. Is
Displayed
Error Number: **** A printer error has occurred. Turn the
printer off and then on again. If this doesn't clear the error,
see the user's guide for more detail. Is Displayed
Error Regarding Automatic Duplex Printing Is Displayed
Page 172 of 1127 pages MX870 series Advanced Guide