Rejecting fax reception – Canon PIXMA MX870 User Manual
Page 788
Advanced Guide
>
Faxing
>
Sending/Receiving Faxes Using the Operation Panel of the Machine
> Rejecting Fax
Reception
Rejecting Fax Reception
You can set the machine to reject faxes with no sender information or those from specific senders.
Select one of the following conditions to reject faxes.
Faxes with no caller identification.
Faxes from senders not registered to the speed dial codes.
Faxes from senders registered in the machine as rejected numbers.
1.
Press the Setup
button.
The Setup menu screen is displayed.
2.
Select
Device settings, then press the OK
button.
3.
Use the
button to select FAX settings, then press the
OK
button.
4.
Use the
button to select Reception settings, then press the OK
button.
5.
Use the
button to select Fax reception reject, then press the OK
button.
6.
Use the
button to select ON, then press the OK
button.
7.
Use the
button to select the fax rejection condition, then press the
OK
button.
You can select one of the three conditions below.
Page 788 of 1127 pages
Rejecting Fax Reception