Canon PIXMA MX870 - Manual (Page 838)

Trimming Default (Off: No trimming), On (follow the camera's setting), Off
Settings on the Machine
You can change the PictBridge print settings from the PictBridge print settings screen. Set the print
settings to Default on the PictBridge compliant device when you want to print according to the
settings on the machine.
This section describes the procedure to display the PictBridge print settings screen. For setting
items, see
PictBridge print settings .
1.
Make sure that the machine is turned on.
2.
Press the Setup button.
3. Select Device settings, then press the OK button.
4.
Use the button to select PictBridge print settings, then press the OK button.
The PictBridge print settings screen is displayed.
Page top
Page 838 of 1127 pages About PictBridge Print Settings