Lcd cannot be seen at all – Canon PIXMA MX870 User Manual
Page 947
Advertising
Advanced Guide
>
Troubleshooting
> LCD Cannot Be Seen At All
LCD Cannot Be Seen At All
If all the lamps on the Operation Panel are off
The machine is not powered on. Connect the power cord and press the
ON
button.
If any lamp on the Operation Panel is lit
The LCD may be in the screen-saver mode. On the Operation Panel, press a button other than the
ON
button.
Page top
Page 947 of 1127 pages
LCD Cannot Be Seen At All
Advertising