Canon PIXMA MX870 - Manual (Page 34)

Advanced Guide Troubleshooting
Contents > Faxing > Sending Faxes
Sending Faxes
This section describes the operation to send a fax with the Numeric buttons and to register the
recipient's numbers to the one-touch speed dial and send a fax.
For other operations, see
Using Various Sending Functions .
Sending a Fax with the Numeric Buttons
Redialing the Number Dialed with the Numeric Buttons
Sending a Fax with One-Touch Speed Dial
Sending a Fax with the Numeric Buttons
Important
If you enter or register an incorrect fax/telephone number with the Numeric buttons, the fax will be
sent to an unexpected recipient. When sending an important fax, we recommend sending the fax
after confirming the recipient's condition.
For details, refer to "Sending a Fax after Speaking on Telephone" in the on-screen manual:
Advanced Guide .
You need to prepare:
Originals to send. See Originals You Can Load .
1. Prepare for sending a fax.
(1)
Make sure that the power is turned on.
See Operation Panel .
(2)
Load the original in the ADF or on the Platen Glass.
See Loading Originals .
Important
When sending a double-sided document, load the document on the Platen Glass. You
cannot scan double-sided documents in the ADF.
Note
For details on the types and conditions of document which you can fax, see Loading
Originals .
Page 34 of 1127 pages Sending Faxes