Canon PIXMA MX870 - Manual (Page 917)

XXXX: XXXX
MAC address XX:XX:XX:XX:XX:XX XX:XX:XX:XX:XX:XX
IPsec settings - Enable (ESP)/Enable (ESP & AH)/
Enable (AH)/Disable
Pre-shared key - XXXXXXXXXXX
Printer name XXXXXXXXXXXXXXX XXXXXXXXXXXXXXX
Bonjour service
name Canon MX870 series
_XXXXXXXXXXXX
Canon MX870 series
_XXXXXXXXXXXX
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
LAN setting list
The list of wired LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items Setting (IPv4) Setting (IPv6)
Connection Active/Inactive Active/Inactive
IP address XXX. XXX. XXX. XXX XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX
Subnet mask XXX. XXX. XXX. XXX -
Subnet prefix
length
- XXX
Default gateway XXX. XXX. XXX. XXX XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX
MAC address XX:XX:XX:XX:XX:XX XX:XX:XX:XX:XX:XX
IPsec settings - Enable (ESP)/Enable (ESP & AH)/Enable
(AH)/Disable
Pre-shared key - XXXXXXXXXXX
Printer name XXXXXXXXXXXXXXX XXXXXXXXXXXXXXX
Bonjour service
name Canon MX870 series
_XXXXXXXXXXXX
Canon MX870 series _XXXXXXXXXXXX
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out, refer to
Printing Out
Network Setting Information .
Important
This print out contains valuable information about your computer. Handle it with care.
Other settings
Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
You cannot change this setting with the memory card inserted in the Card Slot.
You cannot use the same printer name as that already used for other LAN connected
devices.
You cannot use a hyphen for the initial or last character of the printer name.
IPv4/IPv6 setting
Selects the IP version (IPv4 or IPv6). It is recommended to use the machine with IPv4.
Set memory card sharing
Selects whether to share the Card Slot with a LAN connected computer.
Note
You cannot change this setting with the memory card inserted in the Card Slot.
Page 917 of 1127 pages LAN settings