Lan settings, Change wireless/wired, Wireless lan setup – Canon PIXMA MX870 User Manual

Page 916: Confirm lan settings

Advertising
background image

Advanced Guide

>

Changing the Machine Settings

>

Changing the Machine Settings on the LCD

> LAN settings

LAN settings

Change wireless/wired

Activates either wireless LAN or wired LAN. You can also deactivate wireless/wired LAN.

Note

When you change the connection method (wired or wireless), set up the machine according to
the method you will use. For details, refer to your setup manual.

Wireless LAN setup

Selects the setting method for wireless LAN connection.

Note

You can also enter this setting menu by selecting Wireless LAN setup from the Setup menu. In
this case, activate wireless LAN.

Easy setup
Select when you perform settings for wireless LAN manually using the Operation Panel of the
machine.

Note

If you perform settings for wireless LAN from the computer, refer to your setup manual.

Other setup

Select WPS, WCN, or Advanced setup. If you select WPS, select Push button method or PIN

code method according to the method your access point supports, then follow the on-screen
instructions. If you select WCN, you need a USB flash drive on which settings for wireless LAN
are saved. If you select Advanced setup, follow the on-screen instructions.

Confirm LAN settings

The list of wireless/wired LAN settings of this machine is displayed on the LCD.
You can print the list from this setting menu.

WLAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.

Items

Setting (IPv4)

Setting (IPv6)

Connection

Active/Inactive

Active/Inactive

SSID

XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX

Communication
mode

Infrastructure

Infrastructure

Channel

XX

XX

Wireless LAN
security

Disable/WEP(64bit)/WEP(128bit)/

WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)

Disable/WEP(64bit)/WEP(128bit)/

WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)

IP address

XXX. XXX. XXX. XXX

XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX

Subnet mask

XXX. XXX. XXX. XXX

-

Subnet prefix

length

-

XXX

Default gateway

XXX. XXX. XXX. XXX

XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:

Page 916 of 1127 pages

LAN settings

Advertising