Canon PIXMA MX870 - Manual (Page 396)

Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies > Reducing or Enlarging
a Copy
Reducing or Enlarging a Copy
The LCD below is displayed when you press the right Function button in the Copy standby screen. Select
the reduction/enlargement method from Magnif..
Note
Some of reduction/enlargement methods are not available depending on the copy method.
Fit to page
The machine automatically reduces or enlarges the image to fit the page size.
Preset ratio
You can select one of the preset ratios to reduce or enlarge copies.
Select the appropriate ratio from Magnif.. The following ratios are available.
94% A4->8.5x11/156% 5x7->8.5x11/94% 4x6->8.5x11
Note
When you select Fit to page, load the original on the Platen Glass.
When you select Fit to page, the document size may not be detected correctly depending on the
original. In this case, select the setting other than Fit to page.
When you want to copy at the same size as the original, select SameMagnification.
Ratio specified copy
You can specify the copy ratio as a percentage to reduce or enlarge copies. Use the button to
change the copy ratio when the Copy standby screen is displayed.
Page top
Page 396 of 1127 pages Reducing or Enlarging a Copy