Canon PIXMA MX870 - Manual (Page 66)

xD-Picture Card Type H *2
RS-MMC *3
MMCmobile *3
Memory Stick Micro
*4
*1 Use the special "SD Card Adapter".
*2 Requires purchase of a separate compact flash card adapter for xD-Picture Card.
*3 Use the special card adapter.
*4 Use the special Duo size adapter or full size adapter.
Printable Image Data
This machine accepts images taken with a camera compliant with the Design rule
for Camera File system (Exif 2.2/2.21 compliant), TIFF (Exif 2.2/2.21 compliant).
Other image or movie types such as RAW images cannot be printed.
The machine accepts images scanned and saved with the machine when Doc.
type is set to Photo and Format is set to JPEG in the scan mode (file extension
".jpg").
Printable PDF Files
The following documents (PDF files) can be printed with Select doc. print in Menu of the card mode.
For details on printing, refer to the on-screen manual:
Advanced Guide .
PDF files that are created by scanning with the machine with Format set to PDF
or Compact PDF in the scan mode (file extension ".pdf")
PDF files that are created by scanning from MP Navigator EX supplied with the
machine with the PDF compression set to Standard or High (file extension ".pdf",
except for encrypted files)
Other PDF files cannot be printed even if they appear on the list. If you press the right Function
button on the document selection screen, the Details screen will appear. In the following cases, you
cannot print the selected PDF file.
- The Details screen does not appear for the selected PDF file.
- Displayed name for Created with is other than the machine's name or MP Navigator EX.
Inserting the Memory Card
Important
When a memory card is inserted into the Card Slot, the Access lamp is lit. When the
Access
lamp
is flashing, the machine is accessing the memory card. In this case, do not touch the area around
the Card Slot.
Note
When Read/write attribute is set to Writable from USB PC or Writable from LAN PC, you cannot print
image data from the memory card or save scanned data on the memory card using the Operation
Panel of the machine. After using the Card Slot as the memory card drive of a computer, remove
the memory card. Then press the
Setup button to select Device settings, Device user settings, and
set Read/write attribute to Not writable from PC.
For details, refer to the on-screen manual:
Advanced Guide .
When you use a computer to edit or enhance photos saved on a memory card, be sure to print them
from the computer. If you use the Operation Panel, the photos may not be printed properly.
Page 66 of 1127 pages Inserting the Memory Card