Integra LifeSciences Mirror, DenLite Illuminate - Manual (Page 6)

-Page 6 of 14-
2
Equipment Setup and Use
Charging the Batteries
The battery charger will charge 2 I-C 3 AAA batteries in 15 minutes. A fully charged set of new
batteries will last 45 minutes in the DenLite Illuminator Dental Mirror.
1. Place the battery into the charging pocket.
a. Push the positive (+) terminal of the battery against the sliding contact.
b. Press the negative (-) end of the battery to seat it securely into the charging pocket.
2. Flip the prongs from the back of the charger and plug the charger into a standard 110V wall
outlet. You will hear the cooling fan when the charger is operating.
3. A green LED light indicates the charging status and will turn off when charging is complete.
Upon completing the charge, unplug the charger and remove the batteries. It is safe to leave
the batteries into a plugged-in I-C
3 battery charger. However, do not leave the batteries in an
unplugged I-C 3 battery charger
Assembling the DenLite Illuminated Dental
Mirror